Cameron

Through access to lighting designers, retailers and manufacturers, as well as LED application survey, the above categories of light is the most common and most energy-efficient LED lighting applications, LED market trends and potential growth and These applications in the efficiency and performance of the benefits brought about by the greatest increase.

In 2012, 49 million of these 9 applications were LED lights and fixtures. A lamp accounts for 41% of the total installed, but the penetration rate in these applications is currently less than 1%. LEDMR16 the highest penetration rate, accounting for 10% of the total MR16 lamp,

In 2012, the annual energy efficiency of LED is about 71tBtu in 9 categories of applications, which is equivalent to annual energy saving of about $ 675 million

If all nine applications were converted to LEDs, the annual energy savings were close to 3873 tBtu, or about 3.9 trillion Btu, saving about $ 37 billion in energy

Directional lights

1, the directional lamp is mainly reflective, including R, BR, PAR, CFL reflector and their LED replacement lamp.

2, MR or MR16 is also a directional lamp, but the MR16 shape is significantly smaller, and the light output is low, usually and PAR, BR, R lamp compared to use in unused applications, so this report MR16 separate evaluation

3, according to DOELightingFacts data, LED directional light effect: 40-90lm / W, an average of 57lm / W, incandescent, halogen: 10-15lm / W, CFL reflector: 35-45lm / W.